...
Parameter Name | available in Graphical | available in Silent | Description | valid Values | Default Inst | Default Uninst | from Vers. | to Vers. | |
---|---|---|---|---|---|---|---|---|---|
S | Inst, Uninst | Nein | Ja | Activates the Silent Mode in Installation / Uninstallation ATTENTION: "S" must be the first Parameter and has to be written in Uppercases. | --- | --- | --- | 3.7.x | |
General Checks and Settings/Functions | |||||||||
checkts | Inst, Uninst | Ja | Ja | Controls the Check if an Terminal Server is in Install Mode or not. If an Terminal Server is not in Install Mode during the Setup a MessageBox will appear. The Customer has the Possibility to quit the Setup to switch the Terminal Server into Install Mode. | on / off | on | on | 3.7.x | |
checkuac | Inst | Ja | Ja | Controls the Check if the UAC switched on or not. Relevant for Windows 7 only if the Customer changes the UAC after the Setup. | on / off | on | on | 3.8.x | 4.1.x |
checkwk | Inst | Ja | Nein | Controls the Check if an WibuKey is plugged in the Computer. If an WibuKey is plugged in the Computer during the Setup th WibuKey Software/Driver could not be updated correctly. | on / off | on | on | 3.7.x | 3.8.x |
checkcodemeter | Inst | Ja | Nein | Controls the Check if an CodeMeter is plugged in the Computer. | on / off | on | --- | 4.0 | 4.0.3 |
checkdrv | Inst | Ja | Ja | Controls the Check if an Driver contained in the Setup is newer as the installed Driver. If Yes the Option Switch (on the Options Page) will be switched on for Update the Driver. If No the Option Switch will be switched off an the Driver will be leaved in the current State. | on / off | on | 4.0 | ||
langid | Inst | Nein | Ja | Set the Language for custo diagnostic: 407 (German) 809 (English) c0a (Spanish) 40c (French) 40e (Hungarian) 410 (Italian) 419 (Russian) 41b (Slovak) 41f (Turkish) | 407 / 809 / c0a / 40c /40e / 410 / 419 / 41b / 41f | 407 | --- | 3.7.x | |
shellvarcontext | Inst | Nein | Ja | Set the ShellVarContext (logged on User or All Users) where the Shortcuts are created. | all / current | current | --- | 3.7.x | |
CodeMeterServer | Inst | Nein | Ja | Enable / Disable the CodeMeter Server. | on / off | off | --- | 4.4.5 | |
LicenseFilePath | Inst | Ja | Ja | Put here the Path to the "software.lic". If you dont put here any Path (or let the Parameter away) the "software.lic" is searched in the same path as the installer exe. The "software.lic" is copied to the Exe folder. | [Path] | --- | --- | 4.4.5 | |
ManualsPath | Inst | Ja | Ja | Put here the Path to the Folder "custo-med-Manuals". All files in this Folder is copied to the Help folder and afterwards an shortcut to the Help folder is created on the Desktop. If you dont put any Path here (or let the Parameter away) the folder "custo-med-Manuals" is searched in the same path as the installer exe. | [Path] | --- | --- | 4.4.5 | |
LocalMDBPath | Inst | Nein | Ja | To prepare custo diagnostic to use an MDB (instead SQL) as database you can put here the Path to the local MDB (on the Server). The folders are created and an Share is created on that folder, to share the database to the clients. The CustoCfg.ini is prepared with this path and copied to the share to use it for the client installation. Can only used with "/diag=on". | [Path] | --- | --- | 4.4.5 | 4.5.x |
ComponentsComponent (Sections or Options) | |||||||||
diag | Inst, Uninst | Nein | Ja | Steuert die Controls the Installation der of custo diagnostic | on / off | on | on | 3.7.x | |
SQLExprInst | Inst | Nein | Ja | Steuert die Controls the Installation der of Microsoft SQL Express -SoftwareServer | on / off | on | --- | 4.3 | |
MobileCenterInst | Inst | Nein | Ja | Steuert die Controls the Installation des of Microsoft Mobile Center (oder or Active Sync bei Win XPat WinXP) | on / off | on | --- | 4.3 | |
nmsc | Inst | Nein | JaSteuert | die Installation der Verknüpfung für das Netzwerk-Controls the Installation of the Shortcut for the Network ECG Monitoring | on / off | off | --- | 3.7.x | |
emecgsc | Inst | Nein | JaSteuert die Installation der Verknüpfung für das Notfall-EKG | Controls the Installation of the Shortcut for the Direct ECG | on / off | off | --- | 3.7.x | |
ctsc | Inst | Nein | Ja | Steuert die Installation der Verknüpfung für Controls the Installation of the Shortcut for the cardio touch | on / off | off | --- | 4.3.3 | |
satsc | Inst | Nein | JaSteuert | die Installation der Verknüpfung für das Controls the Installation of the Shortcut for the Satellitensystem | on / off | off | --- | 4.3.3 | |
ap | Inst | Nein | Ja | Steuert die Installation der Controls the Installation (Configuration) of the Auto-Run- (Auto-Play-) Funktion für diesen Function for this PC | on / off | off | --- | 3.7.x | |
websp | Inst | Nein | JaSucht während der Installation nach Servicepacks für custo diagnostic. Eine Internetverbindung wird dabei vorausgesetzt | Enables the Search for Updates while installation. A Internet Connection is mandatory to use this Option. | on / off | off | --- | 3.7.x | 3.7.x |
tv | Inst | Nein | JaSteuert | die Installation der Unterstützungsdateien für Remote-UnterstützungControls the Installation of the Support files for the Remote Support | on / off | on | on | 3.8.x | |
sampledb | Inst | Nein | JaSteuert | die Installation der Muster-Datenbank (Nur bei Setup mit Muster-DatenbankControl the Installation of an Sample Database (Available only at Setup files with Sample Database) | on / off | off | --- | 3.7.x | |
pdfprinter | Inst | Nein | Ja | Steuert die Installation des Controls the Installation of the custo diagnostic PDF printer's | on / off | on | --- | 4.1 | |
wibudrv | Inst, Uninst | Nein | Ja | Steuert die Installation der Controls the Installation of the Wibu-Key -Treiber und Software, die für custo diagnostic notwendig sindDriver and Software. Necessary for custo diagnostic. | on / off | on | on | 3.7.x | 3.8.x |
codemeterdrv | Inst, Uninst | Nein | Ja | Steuert die Installation der CodeMeter-Treiber und Software, die für custo diagnostic notwendig sind Controls the Installation of the CodeMeter Driver and Software. Necessary for custo diagnostic. | on / off | on | on | 4.0 | |
c100drv | Inst, Uninst | Nein | Ja | Steuert die Installation der Contols the Installation of the cardio 100 - USB -TreiberDriver | on / off | on | on | 3.7.x | |
c200drv | Inst, Uninst | Nein | Ja | Steuert die Installation der Contols the Installation of the cardio 200 - USB -TreiberDriver | on / off | on | on | 3.7.x | |
cusbcomdrv | Inst, Uninst | Nein | Ja | Steuert die Installation der Treiber für die Contols the Installation of the Driver for custo USB-COM oder für das or ec3000 | on / off | on | off | 3.7.x | |
ccomirdrv | Inst, Uninst | Nein | Ja | Steuert die Installation der Treiber für die Contols the Installation of the Driver for custo com IR | on / off | on | off | 3.8.x | 4.3.x |
ccomrfdrv | Inst, Uninst | Nein | Ja | Steuert die Installation der Treiber für Contols the Installation of the Driver for den custo com RF | on / off | on | off | 4.2 | 4.3.x |
lm506drv | Inst | Nein | Ja | Steuert die Installation des LM506-Bluetooth-Stick-Treibers.Contols the Installation of the LM506 Bluetooth Dongle Driver | on / off | on | --- | 4.1 | |
er2100drv | Inst | Nein | JaSteuert | die Installation des Treibers für das er2100-LaufbandContols the Installation of the Driver for er2100 Treadmill | on / off | on | off | 4.1 | |
cchargerdrv | Inst, Uninst | Nein | Ja | Steuert die Installation des Contols the Installation of the custo charger single -Treibers.Driver | on / off | on | off | 4.3 | 4.3.x |
cwatchdrv | Inst, Uninst | Nein | Ja | Steuert die Installation des Contols the Installation of the custo watch -Treibers.Driver | on / off | on | off | 4.3.3 | 4.3.x |
vspci200ldrv | Inst, Uninst | Nein | Ja | Steuert die Installation der Treiber für die VSCOM PCI200L-Karte, die für das card m verwendet wirdContols the Installation of the Driver for the VSCOM PCI200L Card, used for card m | on / off | off | off | 3.7.x | |
vsusbcomdrv | Inst, Uninst | Nein | Ja | Steuert die Installation der Treiber für den Contols the Installation of the Driver for VSCOM USB-COM - Adapter | on / off | off | off | 3.7.x | |
cdevdrv | Inst, Uninst | Nein | Ja | Steuert die Installation der Treiber für watchContols the Installation of the Driver for watch, charger single, com RF, com IR (KombinationstreiberKombination Driver) | on / off | on | on | 4.4 | |
Behavior during Installation | |||||||||
diaginstpath | Inst | Nein | Ja | Überschreibt den Standard-Pfad der diag Installation (für das Setup) | [Path] | --- | --- | 3.8.x | |
uninstolddiag | Inst | Nein | Ja | Steuert, ob beim Update die bestehende diag-Installation deinstalliert werden soll. Kann zusammen mit "diaginstpath" verwendet werden, um eine zweite Installation auf dem PC anzulegen. | on / off | off | --- | 3.8.x | |
Behavior during Deinstallation | |||||||||
dellog | Uninst | Nein | Ja | Löscht alle Logfiles während der Deinstallation, die von custo diagnostic erstellt worden sind. | on / off | --- | off | 3.7.x | |
deldata (nicht aktiv!) | Uninst | Nein | Ja | Löscht alle lokalen Datenbanken während der Deinstallation. (For Developement only!) | on / off | --- | off | 3.7.x | |
Database Settings in the CustoCfg.ini | |||||||||
wsname | Inst | Ja | Ja | CustoCfg.ini: Überschreibt den Eintrag "WsName=". Hier kann der (NetBios-)Name des Computers/Arbeitsstation angegeben werden | [COMPUTERNAME] | --- | --- | 4.0.3 | |
dbtype | Inst | Ja | Ja | CustoCfg.ini: Bestimmt den Typ der Config-Datenbank, Access (MDB) oder SQL (SQL) | MDB / SQL | --- | --- | 4.1 | 4.5.x |
mdbpath | Inst | Ja | Ja | CustoCfg.ini: vollständiger Pfad für die MDB-Config-Datenbank ACHTUNG: Der Pfad muss mit einem Backslash abschließen. | [Path] | --- | --- | 4.1 | 4.5.x |
mdbdatabase | Inst | Ja | Ja | CustoCfg.ini: Dateiname der MDB-Config-Datenbank | [Filename] | --- | --- | 4.1 | 4.5.x |
sqltype | Inst | Ja | Ja | CustoCfg.ini: Typ des SQL-Servers, derzeit wird nur MS-SQL-Server von diag unterstützt | MS-SQL | --- | --- | 4.1 | |
sqlserver | Inst | Ja | Ja | CustoCfg.ini: DNS-Name oder IP-Adresse des SQL-Servers, der die Config-Datenbank hostet | [NAME] | --- | --- | 4.1 | |
sqlauth | Inst | Ja | Ja | CustoCfg.ini: Authentifikationsmodus am SQL-Server | User / Windows | --- | --- | 4.1 | |
sqluser | Inst | Ja | Ja | CustoCfg.ini: SQL-Server-Benutzername bei Authentifikationsmodus "User" | [SQL-User] | --- | --- | 4.1 | |
sqlpw | Inst | Ja | Ja | CustoCfg.ini: SQL-Server-Benutzer-Passwort bei Authentifikationsmodus "User" (nicht verschlüsselt (Klartext) -> wird verschlüsselt gespeichert) | [SQL-User-Passwort] | --- | --- | 4.1 | |
sqlencpw | Inst | Ja | Ja | CustoCfg.ini: SQL-Server-Benutzer-Passwort bei Authentifikationsmodus "User" (muss bereits bereits verschlüsselt angegeben werden) | [SQL-User-Passwort] | --- | --- | 4.3.1 | |
sqldatabase | Inst | Ja | Ja | CustoCfg.ini: SQL-Datenbankname | [DB-Name] | --- | --- | 4.1 | |
CustoCfgIniFile | Inst | Ja | Ja | Pfad und Dateiname der zu kopierenden CustoCfg.ini (bestehende Datei wird überschrieben!). | [Path]\[Filename] | --- | --- | 4.1.1 | |
CreateNewCustoCfgIniFile | Inst | Ja | Ja | Schreibt in die CustoCfg.ini nur die LangID, damit eine neue, leere CustoCfg.ini erzwungen wird. ACHTUNG: Ist diese Option gesetzt, werden alle anderen Option bzgl. der CustoCfg.ini ignoriert! | --- | --- | --- | 4.1.1 | |
Parameter for Settings File Import | |||||||||
SettingsFile | Inst | Ja | Ja | Pfad und Dateiname der zu verwendenden Einstellungs-Datei. Wenn diese Option angegeben ist und die Einstellungs-Datei valide ist, dann wird nach dem Setup der custo manager.exe mit dieser Einstellungs-Datei gestartet und die enthaltenen Einstellungen in die Konfig-DB eingelesen. (Siehe auch SettingsFileWorkstation und SettingsFileUser) | [Path]\[Filename] | --- | --- | 4.1.1 | |
SettingsFileWorkstation | Inst | Ja | Ja | Name der in der Einstellungs-Datei zu verwendenden (custo diagnostic-) Workstation (bestehende Workstationangabe wird in der Datei überschrieben). Hierbei ist der Netbios-, nicht der DNS-Name anzugeben. Wenn diese Option nicht angegeben wird, dann wird der Workstation-Name verwendet, der in der Datei gespeichert ist. | [WORKSTATIONNAME] | --- | --- | 4.1.1 / 4.3 | 4.3 |
SettingsFileUser | Inst | Ja | Ja | Name des in der Einstellungs-Datei zu verwendenden (custo diagnostic-) User-Namens (bestehende Userangabe wird in der Datei überschrieben). Wenn diese Option nicht angegeben wird, dann wird der zuletzt angemeldete Benutzer, oder der Supervisor verwendet. | [Username] | --- | --- | 4.1.1 / 4.3 | 4.3 |
SettingsWorkstation | Inst | Ja | Ja | Name der in der Einstellungs-Datei zu verwendenden (custo diagnostic-) Workstation (bestehende Workstationangabe wird in der Datei überschrieben). Hierbei ist der Netbios-, nicht der DNS-Name anzugeben. Wenn diese Option nicht angegeben wird, dann wird der Workstation-Name verwendet, der in der Datei gespeichert ist. | [WORKSTATIONNAME] | --- | --- | 4.3.1 | |
SettingsUser | Inst | Ja | Ja | Name des in der Einstellungs-Datei zu verwendenden (custo diagnostic-) User-Namens (bestehende Userangabe wird in der Datei überschrieben). Wenn diese Option nicht angegeben wird, dann wird der zuletzt angemeldete Benutzer, oder der Supervisor verwendet. | [Username] | --- | --- | 4.3.1 | |
License Settings in the CustoCfg.ini | |||||||||
LicNum | Inst | Ja | Ja | CustoCfg.ini: Überschreibt den Eintrag "CustoKeyNum=". Hier kann die Lizenznummer angegeben werden. | [000000] | --- | --- | 4.3 | |
LicUseNetwork | Inst | Ja | Ja | CustoCfg.ini: Überschreibt den Eintrag "Netzwerk". Damit wird festgelegt, das der CodeMeter an einem Netzwerk-Computer angesteckt ist. | 0 / 1 | --- | --- | 4.3 | |
LicServerName | Inst | Ja | Ja | CustoCfg.ini: Überschreibt den Eintrag "Server". Hier kann der DNS- oder Netbios-Name des CodeMeter-Servers angegeben werden. | [SERVER] oder [server.domain.tld] | --- | --- | 4.3 | |
LicServerIP | Inst | Ja | Ja | CustoCfg.ini: Überschreibt den Eintrag "IPAddress". Hier kann die IP-Adresse des CodeMeter-Servers angegeben werden. | [0.0.0.0] | --- | --- | 4.3 | |
LicServerUseIP | Inst | Ja | Ja | CustoCfg.ini: Überschreibt den Eintrag "UseIPAddress". Damit wird entschieden, ob der CodeMeter-Server per IP oder per Name gesucht werden soll. | 0 / 1 | --- | --- | 4.3 | |
Special Service Parameter | |||||||||
x | Inst | Ja | Nein | Versetzt das Setup-Programm in einen Modus, der dem Anwender erlaubt, bestimmte Dateigruppen aus dem (komprimierten) Setup-File zu entpacken | --- | --- | --- | 3.7.x |
...