This option was introduced in versions 4.6.2 and 4.7.
Introduction
The main point here is that the user wants a profile which can consist of several levels and is used for HR control, but only in connection with telemetric training.
During the Test all Watt values in the profile where you can enter as many steps with different watts, is converted into a multilevel HR profile.
The option can be activated via the settings editor in the setting cardio concept\Trainingsplatz\SimulatedMultilevelHrTraining. If this option is active, any free load profile (it only applies to ergometers, this does not apply to treadmills), i.e. the profile where you can enter as many steps with different watts, is converted into a multi-level HR profile.profile for ergometers (not for treadmills!) can be used for this codition.
Prerequisites for this option to work correctly
...
- The patient must have such a have a load controlled free profile assigned
- The patient must have a valid value for maximum HR in his limit settings
- The respective load value in the training phase (the option is only effective in the training phase) may only lie between 0 and 100
...
- current HR
the current HR of patient - current HR difference
signed difference between current HR and exercise HR - exercise HR
current calculated exercise HR of patient - HR level
Is the graphical representation of the current HR difference. Arrow up means that the HF must be increased and vice versa. The color green indicates a good approximation ( difference to setpoint < ± 2 beats / min.), yellow indicates a slightly larger deviation ( difference to setpoint < ± 7 beats / min.), any larger deviations has an red arrow.
