...
To come, also in this occasions, up with a stable trigger, custo med has added the possibility to adjust the gain of the signal that is used to generate the QRS-Trigger.
Instruction for Stress ECG, QRS trigger sensitivity:
The setting is in the service center of custo diagnostic. Under Settings, Belastungs EKG\Intern\QRSTriggerAmplifyPercent. Default the setting is set to 100%. Recommended is to change the sensitivity in a range from 100% up to a maximum of 150%. Otherwise disturbance might be amplified in a way that it could be recognized as a R-top.
Make sure you safe the setting with "Speichern"
...
On the following LINK a short video with the complete instruction. (link: https://oc.customed.de/index.php/s/1KBmmxDZXJ9KbC4)
Instruction for Resting ECG, QRS trigger sensitivity:
For resting ECG this setting can be changed, almost in the same way as in stress ECG. The setting is in the service center of custo diagnostic. Under Settings, Ruhe EKG\Intern\QRSTriggerAmplifyPercent. Default the setting is set to 100%. Recommended is to change the sensitivity in a range from 100% up to a maximum of 150%. Otherwise disturbance might be amplified in a way that it could be recognized as a R-top.
Make sure you safe the setting with "Speichern"
After restart of custo diagnostic this feature will take effect.
Instruction for CPET ECG, QRS trigger sensitivity:
For resting ECG this setting can be changed, almost in the same way as in stress ECG. The setting is in the service center of custo diagnostic. Under Settings, Spiro-Ergometrie\Intern\QRSTriggerAmplifyPercent. Default the setting is set to 100%. Recommended is to change the sensitivity in a range from 100% up to a maximum of 150%. Otherwise disturbance might be amplified in a way that it could be recognized as a R-top.
Make sure you safe the setting with "Speichern"
After restart of custo diagnostic this feature will take effect.