You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

General

The ECG Monitoring can be used as Viewing Module for Customers who want to observe Resting or Stress Test ECG Procedures where the Viewing Place and the ECG Place is spatially separated.

Installation

The ECG Monitoring Module is integrated in custo manager.exe and must not be installed separately. With the Installer you can create a Shortcut on your Desktop to start custo manager.exe as the ECG Monitor Module.
Th Shortcut started with the command "C:\Program Files (x86)\custo diagnostic client\exe\custo manager.exe" /monitoring.

Using

To start the ECG Monitoring Window you have to double click the ECG Monitoring Shortcut on your Desktop.


In the next Step the custo diagnostic Logon will be displayed. You have to logon on custo diagnostic with your credentials.


After the logon th ECG Monitor Window will be displayed.


If any ECG Measuring Desk is sending ECG the Patient Name will be displayed in one of the Channel Buttons.



Settings

Normally the ECG Monitor Window is started with the full Monitor width. If you want to run the ECG Monitoring Window in a smaller Width you have to state the Command Line Option "/Res=" in the Shortcut.

All other Settings for the ECG Monitoring Window are separated saved in the Configuration Database in CSC->WindowedEcgStreaming.

SettingDefault ValueDescription
NumberOfStripes1

Numer simultanous displayed ECG Stripes. Can be set to 1 or 2.
This Setting can modified in the Settings Editor only. This is useful if an Customer wants to see two ECG Stripes of two ECG Sources at the same Time.

PatientButton1stLineSettings27

Date of Birth of the Patient
(this Setting is valid for all ECG Stripes)

PatientButton2ndLineSettings42

Name of the ECG Sender PC
(this Setting is valid for all ECG Stripes)

WindowPosX0last X Position of the Window
WindowPosY0last Y Position of the Window
WindowSizeY0last Y Size of the Window
ECG-Stripe1\EcgChannel16selected ECG Channels
ECG-Stripe1\Gain10ECG Amplitude (10 mm/mV)
ECG-Stripe1\RrViewMode1

Selection between HR or RR Time in the Line below the ECG

ECG-Stripe1\WriteSpeed10ECG Speed (10 mm/s)
ECG-Stripe2\EcgChannel16selected ECG Channels
ECG-Stripe2\Gain10ECG Amplitude (10 mm/mV)
ECG-Stripe2\RrViewMode1

Selection between HR or RR Time in the Line below the ECG

ECG-Stripe2\WriteSpeed10ECG Speed (10 mm/s)


Command setting:


When using with multiple monitors, the last position of the ecg monitoring window is always saved.

The screen resolution can be set with "/res...", for example "/res=1280x800" 



  • No labels