Introduction
This article describes haw to configure individual information blocks in cardiac rehab training overview page.
General
All information blocks (A and B in the picture below) can be configured individually. These can be set individually for each exercise station or identically for all exercise stations. For the case that all training places have the same type of equipment (e.g. all only ergometers) it makes more sense to configure all information blocks identically.
Settings of the information block
The information block has two main setting options:
- Layout
- Content
Layout settings
The information block is divided into 4 areas, their arrangement and size can be freely configured. To illustrate the division of the fields, the following pictures have dashed lines, these lines can only be seen in the setting. Possible settings are:
Layout | Description |
---|---|
4 smal fields, with smal digits | |
2 large fields one above the other with large digits | |
3 fields of which 2 are small and one large field below | |
3 fields of which 2 are small and one large field above |
Content settings
Each individual field within the information block can have one of the following values:
Value | Description |
---|---|
current HR | This is the current heart rate of the patient and is always updated when it changes |
Rest HR | This is the patient's resting heart rate, measured during the first 10 seconds of training. |
HR-Difference | Is the current difference between the training puls and the current heart reate of the patient |
HR-Limit value | Is the maximum heart rate set individually for the patient |
Time in stage | Is the current time in min:sec format in the current training phase |
Remaining Time in stage | Is the remaining time in min:sec format in the current training phase |
Total time | Is the total training time in min:sec format |
Remaining time | Is the total remaining time of training in min:sec format |
Rotation | Is the current rotation at the ergometer |
Current load | Is the current load value at the training device |
Time till next BP measurement | The remining time min:sec format until the next automatic blood pressure measurement is triggered |
Burned clalories | The total amount of calories burned so far in training |
CG adress | custo guard adress |
guard labeling | individual labeling text of custo guard |
CG radio quality | the signal quality in % valus of custo guard radio connection |
Total record time | The complete recording time, this includes also the times which were already recorded before the training start. The ECG signal and the HR values are recorded before the start of the training and can be displayed separately later in the evaluation display. |
Total distanc | Is the distance covered on the treadmill during the workout |
SPO2 value | Is the current SPO2 value ( if avaible) of the patient |
Lactate value | Is the current lactate value ( if avaible) of the patient |
max. Watt/kg | The quotient of the maximum load and the patient's weight |
min. Watt/kg | The quotient of the minimum load and the patient's weight |
Ø Watt/kg | The quotient of the mean load and the patient's weight |
initial SPO2 | The initial SPO2 value at the beginning of the workout |
MET | |
min. MET | |
Ø MET | |
Target load | Is the last load value transmitted to the ergometer |
current percentage HR change | |
comulativ number of VPB's | |
remaining time in the range | Is the remaining time in the current stage of an free training profile in min:sec format |
Name of exercise device | |
Watts limit | Is the Watts limit value of the patient |
ECG signal quality | Is the current ECG signal quality score value, see also alerting bad ECG signal quality |
current ECG signal quality value | Is the calculated current ECG signal quality value, see also alerting bad ECG signal quality |
Birthday of patient | |
Age of patient | |
Remark field of patient | |
Watt-limit settings | |
Load ceiling settings | |
Load setting | Load adjustment control. The selection of the load control only makes sense for large fields. This control allows you to set up and down the current load on the Ergometer. |
Speed settings | Speed and inlination adjustment control. The selection of the speed control only makes sense for large fields. This control allows you to set up and down the current speed/inclination on the treadmill. |
Exercise control key | A separate button for each exercise staion to control its training. Start/Stop und next training section. |
Borg | current Borg value |
HR controlling state | A graphical representation of the automatic HR control in case of HR controllen trainings |
Settings page
The settings page can be found in cardiac rehab settings General → Display 1.
Area | Description |
---|---|
A | Selects the the of settings
|
B | Selects the desired information block you want to set
|
C | Layout selection |
D | Selection of the individual fields depending on the selected layout |