...
The wallboard is an application that allows to display training parameters from the rehabilitation PC at another place in the network.
Router:
Every router has an individual MAC address for the respective network connection (1)
Firmware from custo router => raspberrypi3-20180427072426, Date of release: "Jan-13 2020 15:13:12" (2)
Configuration:
 | input from fix network settings, for example by peer to peer connection (separate network card or standalone installation), Default is DHCP, the router gets the address values from the DHCP server |
| alternative setting: Access data for WIFI |
| access data for the custo diagnostic Server: URL: the information can be found in the CustoCfg.ini of the training PC, by DHCP connection for example: http://CFT9PF7.ms-entwicklung.de:8080/diag by standalone or local connection, set the ip adress from the server, example: http://172.16.0.11:8080/diag Username and Password: Supervisor and Password Attention: The settings are only saved, if the connection to the server is correct, see (1) |
| Select the name of the custo router later in the wallboard configuration from custo diagnostic. ATTENTION: The name can only be selected if the custo router is correctly configured and has logged on to the diag server correctly at least once. |
Wallboard settings in custo diagnostic
How can i find the settings?
...
(1) Setting "Cardiac Rehab" (2) Export (3) Wallboard
über "Add" können verschiedene Wallboards angelegt werden:
Dimension: how many training places will be displayed, here in 4x2 = 8 (in total)
Configuration of the wallboard
(1) Creating the Wallboard
(2) Format of the wallboard
Dimension: Number of training places
Form: Layout of the output training parameters, maximum 6 possible
(3) Selection of training parameters for output, max 6
(4) Example View
Zuweisen des Router und des wallboards in custo diagnostic:
Assigning the wallboard to the router
(1) Selecting available the router from the list
(2) Adding available the wallboard name for this router
(3) Selecting the view and available the trainingsplace stations of which the training parameters should be displayed
(4) Selecting the wallboard for this router Click "Save"
(5) Selecting the training locations to be displayed (6) Save
for testing => (7) activate the "Kiosk Mode" (8) Click Test => example values are output on the wallboard via the router
"Enable" the Kioskmode => switch from router configuration view to wallboard view
(6) "Test" Example values are set at the router (Patient names are only displayed if they were previously created in the database)
Example view of this configuration on the router:
important: we need maximum 16 patient in the database.