Introduction: The article describes the configuration of the router and how can be the wallbord configured.
What is a wallboard?
The wallboard is an application that allows to display training parameters from the rehabilitation PC at another place in the network.
Router:
Every router has an individual MAC address for the respective network connection (1)
Firmware from custo router => raspberrypi3-20180427072426, Date of release: "Jan-13 2020 15:13:12" (2)
Configuration:
 | input from fix network settings, for example by peer to peer connection (separate network card or standalone installation), Default is DHCP, the router gets the address values from the DHCP server |
| alternative setting: Access data for WIFI |
| access data for the custo diagnostic Server: URL: the information can be found in the CustoCfg.ini of the training PC, by DHCP connection for example: http://CFT9PF7.ms-entwicklung.de:8080/diag by standalone or local connection, set the ip adress from the server, example: http://172.16.0.11:8080/diag Username and Password: Supervisor and Password Attention: The settings are only saved, if the connection to the server is correct, see (1) |
| Select the name of the custo router later in the wallboard configuration from custo diagnostic. ATTENTION: The name can only be selected if the custo router is correctly configured and has logged on to the diag server correctly at least once. |
Wallboard settings in custo diagnostic
How can i find the settings?
(1) Setting "Cardiac Rehab" (2) Export (3) Wallboard
über "Add" können verschiedene Wallboards angelegt werden:
Dimension: how many training places will be displayed, here in 4x2 = 8 (in total)
Form: Layout of the output training parameters, maximum 6 possible
Selection of training parameters for output, max 6
Zuweisen des Router und des wallboards in custo diagnostic:
(1) Selecting the router (2) Adding the wallboard name (3) Selecting the view and training parameters (4) Selecting the wallboard for this router (5) Selecting the training locations to be displayed (6) Save
for testing => (7) activate the "Kiosk Mode" (8) Click Test => example values are output on the wallboard via the router
important: we need maximum 16 patient in the database.