The Setup Program supports some Command Line Parameters to change Settings in the Setup, to do some Actions (e.g. write a CustoCfg.ini or Import Settings into the ConfigDB) or enable or disable some 'Sections' (Options) in the Setup. In addition the Setup Program supports a Silent Mode to supress all the Dialog Boxes and to install the Software and/or Drivers and/or additional Options silently without user intervention.
Parameter Name |
| available in Graphical | available in Silent | Description | valid Values | Default Inst | Default Uninst | from Vers. | to Vers. |
---|
S | Inst, Uninst | No | Yes | Activates the Silent Mode in Installation / Uninstallation ATTENTION: "S" must be the first Parameter and has to be written in Uppercases. | --- | --- | --- | 3.7.x |
|
General Checks and Settings/Functions |
checkts | Inst, Uninst | Yes | Yes | Controls the Check if an Terminal Server is in Install Mode or not. If an Terminal Server is not in Install Mode during the Setup a MessageBox will appear. The Customer has the Possibility to quit the Setup to switch the Terminal Server into Install Mode |
Parameter Name | available in Graphical | available in Silent | Description | valid Values | Default Inst | Default Uninst | from Vers. | to Vers. | S | Inst, Uninst | Nein | Ja | Activates the Silent Mode in Installation / Uninstallation ATTENTION: "S" must be the first Parameter and has to be written in Uppercases. | --- | --- | --- | 3.7.x | General Checks and Settings/Functions |
checkts | Inst, Uninst | Ja | Ja | Controls the Check if an Terminal Server is in Install Mode or not. If an Terminal Server is not in Install Mode during the Setup a MessageBox will appear. The Customer has the Possibility to quit the Setup to switch the Terminal Server into Install Mode. | on / off | on | on | 3.7.x | checkuac | Inst | Ja | Ja | Controls the Check if the UAC switched on or not.Relevant for Windows 7 only if the Customer changes the UAC after the Setup8checkwk4.1.x | JaNein an WibuKey is plugged in the Computer.If an the UAC switched on or not. Relevant for Windows 7 only if the Customer changes the UAC after the Setup. | on / off | on | on | 3.8.x | 4.1.x |
checkwk | Inst | Yes | No | Controls the Check if an WibuKey is plugged in the Computer. If an WibuKey is plugged in the Computer during the Setup th WibuKey Software/Driver could not be updated correctly. | on / off | on | on | 3.7.x | 3.8.x |
checkcodemeter | Inst |
JaNeinNo | Controls the Check if an CodeMeter is plugged in the Computer. | on / off | on | --- | 4.0 | 4.0.3 |
checkdrv | Inst |
JaJaYes | Controls the Check if an Driver contained in the Setup is newer as the installed Driver. |
Steuert die Überprüfung der Treiberversionen, damit die Treiberinstallationen (Sektionen) automatisch ein- / ausgeschaltet werden (Treiberupdate). Bei "on" werden alle Treiber überprüft und ggf. geupdatet, bzw. neu installiertIf Yes the Option Switch (on the Options Page) will be switched on for Update the Driver. If No the Option Switch will be switched off an the Driver will be leaved in the current State. | on / off | on |
| 4.0 |
|
langid | Inst |
NeinJa | Bestimmt die Sprache für Yes | Set the Language for custo diagnostic: 407 ( |
DeutschEnglischSpanischFranzösischUngarischItalienischRussischSlowakischTürkischTurkish) | 407 / 809 / c0a / 40c /40e / 410 / 419 / 41b / 41f | 407 | --- | 3.7.x |
|
shellvarcontext | Inst |
NeinJa | Bestimmt, ob die Software für den angemeldeten Benutzer, oder für alle Benutzer installiert werden sollYes | Set the ShellVarContext (logged on User or All Users) where the Shortcuts are created. | all / current | current | --- | 3.7.x |
|
CodeMeterServer | Inst |
Nein | Ja | Schaltet den CodeMeter-Server ein oder aus.No | Yes | Enable / Disable the CodeMeter Server. | on / off | off | --- | 4.4.5 |
|
LicenseFilePath | Inst |
JaJa | Kann zum Angeben des Pfades zur Yes | Put here the Path to the "software.lic" |
verwendet werden. Wird kein Pfad angegeben (oder der Parameter weggelassen), dann wird im Pfad der Setup.exe nach der Datei gesucht.Hinweis: Der Dateiname ist immer "software.lic" und muss beim Parameter nicht angegeben werden. Es wird nicht geprüft, ob die Datei auch tatsächlich eine Lizenzdatei ist.Put here the Path to the "software.lic". If you dont put here any Path (or let the Parameter away) the "software.lic" is searched in the same path as the installer exe. The "software.lic" is copied to the Exe folder.Hint: The filename should be everytime "software.lic" but is not added to the path in the parameter. The content of the software.lic is not be validated.. If you dont put here any Path (or let the Parameter away) the "software.lic" is searched in the same path as the installer exe. The "software.lic" is copied to the Exe folder. Hint: The filename should be everytime "software.lic" but is not added to the path in the parameter. The content of the software.lic is not be validated. | [Path] | --- | --- | 4.4.5 |
|
ManualsPath | Inst |
JaJa | Kann zum Angeben des Pfades zu den zu kopierenden Gebrauchsanweisungen verwendet werden. Die GEB's müssen sich immer im Unterverzeichnis Yes | Put here the Path to the Folder "custo-med-Manuals" |
befinden. Wird kein Pfad angegeben (oder der Parameter weggelassen), dann wird im Pfad der Setup.exe nach dem Verzeichnis gesucht. Alle Dateien in dem Verzeichnis werden nach "diaginstpath\Help" kopiert und ein ShortCut (auf "Help") auf dem Desktop angelegt.Put here the Path to the Folder "custo-med-Manuals". All files in this Folder is copied . All files in this Folder is copied to the Help folder and afterwards an shortcut to the Help folder is created on the Desktop. If you dont put any Path here (or let the Parameter away) the folder "custo-med-Manuals" is searched in the same path as the installer exe. | [Path] | --- | --- | 4.4.5 |
|
LocalMDBPath | Inst |
Nein | Ja | Um custo diagnostic auf die Verwendung einer MDB-Datenbank vorzubereiten (anstatt SQL), kann hier ein Pfad für die MDB-Datenbank angegeben werden. Der Pfad wird erstellt, sofern noch nicht vorhanden, und eine Datei-Freigabe darauf erstellt. Die CustoCfg.ini wird aber mit dem Netzwerk-Pfad vorbereitet, damit diese auch bei den Clients verwendet werden kann. Kann nur zusammen mit "/diag=on" verwendet werden.No | Yes | To prepare custo diagnostic to use an MDB (instead SQL) as database you can put here the Path to the local MDB (on the Server). The folders are created and an Share is created on that folder, to share the database to the clients. The CustoCfg.ini is prepared with this path and copied to the share to use it for the client installation. Can only used with "/diag=on". | [Path] | --- | --- | 4.4.5 | 4.5. |
5 Componentsx |
Component (Sections or Options)
|
diag | Inst, Uninst |
NeinJaSteuert die Controls the Installation |
der of custo diagnostic | on / off | on | on | 3.7.x |
|
SQLExprInst | Inst |
NeinJaSteuert die Controls the Installation |
der -SoftwareServer | on / off | on | --- | 4.3 |
|
MobileCenterInst | Inst |
NeinJaSteuert die Controls the Installation |
des of Microsoft Mobile Center ( |
oder bei Win XPat WinXP) | on / off | on | --- | 4.3 |
|
nmsc | Inst |
NeinJaSteuert die Installation der Verknüpfung für das Netzwerk-Controls the Installation of the Shortcut for the Network ECG Monitoring | on / off | off | --- | 3.7.x |
|
emecgsc | Inst |
NeinJaSteuert die Installation der Verknüpfung für das Notfall-EKGControls the Installation of the Shortcut for the Direct ECG | on / off | off | --- | 3.7.x |
|
ctsc | Inst |
NeinJaSteuert die Installation der Verknüpfung für Controls the Installation of the Shortcut for the cardio touch | on / off | off | --- | 4.3.3 |
|
satsc | Inst |
NeinJaSteuert die Installation der Verknüpfung für das Controls the Installation of the Shortcut for the Satellitensystem | on / off | off | --- | 4.3.3 |
|
ap | Inst |
NeinJaSteuert die Installation der Controls the Installation (Configuration) of the Auto-Run- (Auto-Play-) |
Funktion für diesen Function for this PC | on / off | off | --- | 3.7.x |
|
websp | Inst |
NeinJa | Sucht während der Installation nach Servicepacks für custo diagnostic. Eine Internetverbindung wird dabei vorausgesetztYes | Enables the Search for Updates while installation. A Internet Connection is mandatory to use this Option. | on / off | off | --- | 3.7.x | 3.7.x |
tv | Inst |
NeinJaSteuert die Installation der Unterstützungsdateien für Remote-UnterstützungControls the Installation of the Support files for the Remote Support | on / off | on | on | 3.8.x |
|
sampledb | Inst |
NeinJaSteuert die Installation der Muster-Datenbank (Nur bei Setup mit Muster-DatenbankControl the Installation of an Sample Database (Available only at Setup files with Sample Database) | on / off | off | --- | 3.7.x |
|
pdfprinter | Inst |
NeinJaSteuert die Installation des Controls the Installation of the custo diagnostic PDF printer |
's | on / off | on | --- | 4.1 |
|
wibudrv | Inst, Uninst |
NeinJaSteuert die Installation der Controls the Installation of the Wibu-Key |
-Treiber und Software, die für custo diagnostic notwendig sindDriver and Software. Necessary for custo diagnostic. | on / off | on | on | 3.7.x | 3.8.x |
codemeterdrv | Inst, Uninst |
NeinJaSteuert die Installation der CodeMeter-Treiber und Software, die für custo diagnostic notwendig sindControls the Installation of the CodeMeter Driver and Software. Necessary for custo diagnostic. | on / off | on | on | 4.0 |
|
c100drv | Inst, Uninst |
NeinJaSteuert die Installation der Contols the Installation of the cardio 100 |
--TreiberDriver | on / off | on | on | 3.7.x |
|
c200drv | Inst, Uninst |
NeinJaSteuert die Installation der Contols the Installation of the cardio 200 |
--TreiberDriver | on / off | on | on | 3.7.x |
|
cusbcomdrv | Inst, Uninst |
NeinJaSteuert die Installation der Treiber für die Contols the Installation of the Driver for custo USB-COM |
oder für das or ec3000 | on / off | on | off | 3.7.x |
|
ccomirdrv | Inst, Uninst |
NeinJaSteuert die Installation der Treiber für die Contols the Installation of the Driver for custo com IR | on / off | on | off | 3.8.x | 4.3.x |
ccomrfdrv | Inst, Uninst |
NeinJaSteuert die Installation der Treiber für Contols the Installation of the Driver for den custo com RF | on / off | on | off | 4.2 | 4.3.x |
lm506drv | Inst |
Nein JaSteuert die Installation des LM506-Bluetooth-Stick-Treibers.Contols the Installation of the LM506 Bluetooth Dongle Driver | on / off | on | --- | 4.1 |
|
er2100drv | Inst |
NeinJaSteuert die Installation des Treibers für das er2100-LaufbandContols the Installation of the Driver for er2100 Treadmill | on / off | on | off | 4.1 |
|
cchargerdrv | Inst, Uninst |
NeinJaSteuert die Installation des Contols the Installation of the custo charger single |
-Treibers.Driver | on / off | on | off | 4.3 | 4.3.x |
cwatchdrv | Inst, Uninst |
NeinJaSteuert die Installation des Contols the Installation of the custo watch |
-Treibers.Driver | on / off | on | off | 4.3.3 | 4.3.x |
vspci200ldrv | Inst, Uninst |
NeinJaSteuert die Installation der Treiber für die VSCOM PCI200L-Karte, die für das card m verwendet wirdContols the Installation of the Driver for the VSCOM PCI200L Card, used for card m | on / off | off | off | 3.7.x |
|
vsusbcomdrv | Inst, Uninst |
NeinJaSteuert die Installation der Treiber für den Contols the Installation of the Driver for VSCOM USB-COM |
- Adapter | on / off | off | off | 3.7.x |
|
cdevdrv | Inst, Uninst |
NeinJaSteuert die Installation der Treiber für watchContols the Installation of the Driver for watch, charger single, com RF, com IR ( |
KombinationstreiberKombination Driver) | on / off | on | on | 4.4 |
|
Behavior during Installation |
diaginstpath | Inst |
NeinJa | Überschreibt den Standard-Pfad der diag Installation (für das Setup)Yes | Set the Path where custo diagnostic ist installed to. If this Parameter omitted the Default Path ('%ProgramFiles(x86)\custo med') is used. | [Path] | --- | --- | 3.8.x |
|
uninstolddiag | Inst |
NeinJa | Steuert, ob beim Update die bestehende diag-Installation deinstalliert werden soll. Kann zusammen mit "diaginstpath" verwendet werden, um eine zweite Installation auf dem PC anzulegenYes | Controls if during an Update Situation the "old" Installation to be removed or not. If used together with 'diaginstpath' you can install a second Installation (for Backup- or "old Database"-Situations). | on / off | off | --- | 3.8.x |
|
Behavior during Deinstallation |
dellog | Uninst |
NeinJaLöscht alle Logfiles während der Deinstallation, die von custo diagnostic erstellt worden sindDelete all Logfiles (Setup- and custo diagnostic Log Files) during the Uninstall. | on / off | --- | off | 3.7.x |
|
deldata (nicht aktiv!) | Uninst |
NeinJa | Löscht alle lokalen Datenbanken während der Deinstallation. (For Developement Yes | Delete all local Databases during the Uninstall. (for Development and Access Databases only!) | on / off | --- | off | 3.7.x |
|
Database Settings in the CustoCfg.ini |
wsname | Inst |
JaJa Überschreibt den Eintrag Overwrites the Entry "WsName=". |
Hier kann der (NetBios-)Name des Computers/Arbeitsstation angegeben werdenHere the NetBios Name of the Workstation can be specified. | [COMPUTERNAME] | --- | --- | 4.0.3 |
|
dbtype | Inst |
JaJa Bestimmt den Typ der Config-DatenbankSets the Type of the (Config) Database, Access (MDB) |
oder or SQL (SQL) | MDB / SQL | --- | --- | 4.1 | 4.5.x |
mdbpath | Inst |
JaJa | CustoCfg.ini: vollständiger Pfad für die MDB-Config-Datenbank ACHTUNG: Der Pfad muss mit einem Backslash abschließenYes | CustoCfg.ini: complete Path for the Access Database. Attention: The Path has to be end up with an Backslash. | [Path] | --- | --- | 4.1 | 4.5.x |
mdbdatabase | Inst |
JaJa Dateiname der MDB-Config-DatenbankFile Name of the Access Database | [Filename] | --- | --- | 4.1 | 4.5.x |
sqltype | Inst |
JaJa Typ des SQL-Servers, derzeit wird nur MS-SQL-Server von diag unterstütztType of the SQL Server. At this time the MS-SQL is supported only. | MS-SQL | --- | --- | 4.1 |
|
sqlserver | Inst |
JaJa- oder IP-Adresse des SQL-Servers, der die Config-Datenbank hostetor IP Addresse of the SQL Server Computer where the Database is hosted | [NAME] | --- | --- | 4.1 |
|
sqlauth | Inst |
JaJa Authentifikationsmodus am SQL-Authentification Mode of the SQL Server | User / Windows | --- | --- | 4.1 |
|
sqluser | Inst |
JaJa-Server-Benutzername bei Authentifikationsmodus Server User Name at Authentification Mode "User" | [SQL-User] | --- | --- | 4.1 |
|
sqlpw | Inst |
JaJa-Server-Benutzer-Passwort bei Authentifikationsmodus Server User Passwort at Authentification Mode "User" ( |
nicht verschlüsselt (Klartextnot encrypted (Plain Text) -> |
wird verschlüsselt gespeichertis stored encrypted) | [SQL-User-Passwort] | --- | --- | 4.1 |
|
sqlencpw | Inst |
JaJa-Server-Benutzer-Passwort bei Authentifikationsmodus Server User Passwort at Authentification Mode "User" ( |
muss bereits bereits verschlüsselt angegeben werdenmust be specified already encrypted) | [SQL-User-Passwort] | --- | --- | 4.3.1 |
|
sqldatabase | Inst |
JaJa-DatenbanknameDatenbase Name | [DB-Name] | --- | --- | 4.1 |
|
CustoCfgIniFile | Inst |
JaJa | Pfad und Dateiname der zu kopierenden CustoCfg.ini (bestehende Datei wird überschrieben!).Alle anderen Optionen zum Beschreiben der CustoCfg.ini werden ignoriert.Yes | Path and File Name of the to be copied File 'CustoCfg.ini'. An existing File is overwritten! Al other Options for the CustoCfg.ini are ignored! | [Path]\[Filename] | --- | --- | 4.1.1 |
|
CreateNewCustoCfgIniFile | Inst |
JaJa | Schreibt in die CustoCfg.ini nur die LangID, damit eine neue, leere CustoCfg.ini erzwungen wird.ACHTUNG: Ist diese Option gesetzt, werden alle anderen Option bzgl. der CustoCfg.ini ignoriertYes | Creates an new empty CustoCfg.ini (only 'LandID' will be written). This Option can be used for Repairs os Misconfigurations. An existing File is overwritten! Al other Options for the CustoCfg.ini are ignored! | --- | --- | --- |
4.1.1 | Parameter for Settings File |
SettingsFile | Inst | Ja | Ja | Pfad und Dateiname der zu verwendenden Einstellungs-Datei. Wenn diese Option angegeben ist und die Einstellungs-Datei valide ist, dann wird nach dem Setup der custo manager.exe mit dieser Einstellungs-Datei gestartet und die enthaltenen Einstellungen in die Konfig-DB eingelesen.(Siehe auch SettingsFileWorkstation und | 4.1.1 |
|
Parameter for Settings File Import
|
SettingsFile | Inst | Yes | Yes | Path and File name of the Settings file to be used. If this Option is specified and the Settings file is a valid file, the custo manager.exe is started with a Command Line Parameter and this File. During the Start of the custo manager.exe the Settings will be imported into the ConfigDB which are contained in this FIle. (See also SettingsFileWorkstation and SettingsFileUser) | [Path]\[Filename] | --- | --- | 4.1.1 |
|
SettingsFileWorkstation | Inst |
JaJaYes | Name der in der Einstellungs-Datei zu verwendenden (custo diagnostic-) Workstation (bestehende Workstationangabe wird in der Datei überschrieben). Hierbei ist der Netbios-, nicht der DNS-Name anzugeben. Wenn diese Option nicht angegeben wird, dann wird der Workstation-Name verwendet, der in der Datei gespeichert ist. (Option replaced by SettingsWorkstation) | [WORKSTATIONNAME] | --- | --- | 4.1.1 / 4.3 | 4.3 |
SettingsFileUser | Inst |
JaJaYes | Name des in der Einstellungs-Datei zu verwendenden (custo diagnostic-) User-Namens (bestehende Userangabe wird in der Datei überschrieben). Wenn diese Option nicht angegeben wird, dann wird der zuletzt angemeldete Benutzer, oder der Supervisor verwendet. (Option replaced by SettingsUser) | [Username] | --- | --- | 4.1.1 / 4.3 | 4.3 |
SettingsWorkstation | Inst |
JaJa der in der Einstellungs-Datei zu verwendenden of the to be used (custo diagnostic-) Workstation |
(bestehende Workstationangabe wird in der Datei überschrieben).Hierbei ist der Netbios-, nicht der DNS-Name anzugeben.Wenn diese Option nicht angegeben wird, dann wird der Workstation-Name verwendet, der in der Datei gespeichert istin the Settings file. The existing Workstation in the Settings file will be overwritten. Here the Netbios name, not the DNS name must be specified. If this Parameter is not stated, the existing Workstation name in the Settings file is used. | [WORKSTATIONNAME] | --- | --- | 4.3.1 |
|
SettingsUser | Inst |
JaJa des in der Einstellungs-Datei zu verwendenden of the to be used (custo diagnostic-) |
User-Namens (bestehende Userangabe wird in der Datei überschrieben).Wenn diese Option nicht angegeben wird, dann wird der zuletzt angemeldete Benutzer, oder der Supervisor verwendetUser in the Settings file. The existing User name in the Settings file will be overwritten. If this Parameter is not stated, the existing User name in the Settings file is used. | [Username] | --- | --- | 4.3.1 |
|
License Settings in the CustoCfg.ini |
LicNum | Inst |
JaJa Überschreibt den Eintrag Overwrites the Entry "CustoKeyNum=". |
Hier kann die Lizenznummer angegeben werdenHere the License Number can be specified. | [000000] | --- | --- | 4.3 |
|
LicUseNetwork | Inst |
JaJa Überschreibt den Eintrag Overwrites the Entry "Netzwerk |
". Damit wird festgelegt, das der CodeMeter an einem Netzwerk-Computer angesteckt ist=". With this Parameter the Location (Local or Network) of the CodeMeter can be specified. | 0 / 1 | --- | --- | 4.3 |
|
LicServerName | Inst |
JaJa Überschreibt den Eintrag Overwrites the Entry "Server". |
Hier kann der DNS- oder Netbios-Name des CodeMeter-Servers angegeben werdenHere the DNS or Netbios Name of the CodeMeter Servers can be specified. | [SERVER] oder [server.domain.tld] | --- | --- | 4.3 |
|
LicServerIP | Inst |
JaJa Überschreibt den Eintrag Overwrites the Entry "IPAddress". |
Hier kann die IP-Adresse des CodeMeter-Servers angegeben werdenHere the IP Address of the CodeMeter Server can be specified. | [0.0.0.0] | --- | --- | 4.3 |
|
LicServerUseIP | Inst |
JaJa Überschreibt den Eintrag Overwrites the Entry "UseIPAddress". |
Damit wird entschieden, ob der CodeMeter-Server per IP oder per Name gesucht werden sollWith this Parameter can be specified whether the CodeMeter Server should be searched by IP Address or by DNS Name. | 0 / 1 | --- | --- | 4.3 |
|
Special Service Parameter |
x | Inst |
JaNeinVersetzt das Setup-Programm in einen Modus, der dem Anwender erlaubt, bestimmte Dateigruppen aus dem (komprimierten) Setup-File zu entpackenSwitch the Setup Program into a special Service Mode where the contained Files can be extracted. All other Parameters are ignored. | --- | --- | --- | 3.7.x |
Hinweis: Bei den Kommandozeilen-Parametern ist die Groß-/Kleinschreibung zu beachten!
Note: The command line parameters are case-sensitive, please note exactly the notation!
Command Line SampleBeispiel für eine Kommandozeile:
C:\diag4-1_Setup.exe /S "/diaginstpath=C:\custo med" /c100drv=off /langid=809 /wsname=CUSTOSTDWS01
ACHTUNG: Wenn Teile eines Parameters Leerzeichen enthalten, dann muss der gesamte Parameter in Hochkomma gesetzt werden (siehe /diaginstpath).
Legende:
ATTENTION: If the Value of an Parameter contains Empty Spaces the whole Parameter (Value included) must be written in quotation marks (refer /diaginstpath=).
Legend:
Wert | BedeutungHier trifft kein Wert zu, keine Eingabe möglichThis Parameter has no value, no entry possible |
on / off 0 / 1 407 / 809 ... |
Genau die angegebenen Werte (z.B.Exactly the specified values (for example: "on" |
und sind zugelassen, bitte genau diese Schreibweise beachtenare permitted, please note exactly this notation. |
[NAME] |
Hier muss eine Bezeichnung / ein Name ausschließlich in Großbuchstaben (oder Zahlen) eingegeben werdenHere a designation / a name must be specified in capital letters only (or numbers). |
[Name] |
Hier muss eine Bezeichnung / ein Nameeingegeben werden, es sind alle Zeichen zugelassenHere a designation / name must be specified, all characters are allowed. |
[000000] |
Hier dürfen nur Zahlen eingegeben werden, Buchstaben sind nicht zulässigHere numbers only may be specified, letters are not allowed. |