Introduction:
The article describes the configuration of comRF for the Connection to guard.
There are 2 different types of comRF sticks:
- Standard comRF , Example for Declaration on the nameplate on the device "custo comRF ER2012 00584"
- comRF Long range (higher radio range) Example for Declaration on the nameplate on the device "custo com RF LR ERL2016 00084", "LR" means Long
The set up of the radio setting takes place only once and is then valid for all comRF sticks. The connection between guard and COMRF is automatically created at the start of the "New Exercise" button.
For a stable radio quality an N + 1 connection is recommended, that means for every training place a comRF stick plus an additional one.
Example: 8 training places require 9 comRF sticks.
For Attention!!
The radio range and quality depends on several points:
- guard and comRF must always have line of sight
- in large rooms, the comRF are fixed to the ceiling
Conditions:
- Install Driver from comRF see https://www.customed.de/docs/x/SgG Section: "Available Drivers" => "custo med Devices Driver"
Settings:
| Property | Description |
|---|---|
| 1-3 | Enter Page Setting from comRF |
| 4 a | Display Standard comRF Stick |
| 4 b | Display Long Range comRF, see Beginn Serialnumber ERL |
| 5 | Display serched guards after click "Search" |
| 6+7 | Enter Setting Page "Maximum Number of used Radio channels" |
| 8 | "1" Standard Setting (per training place one comRF to guard + one additional), "2" Maximum Setting for one comRF and 2 guard 3 channel, by 1channel guard is the Maximum 1comRF to 6 guard |
| 9 | Save the Setting with "ok" |